Model Number

SHM1212-Single Heads

Features:

Suitable Materials

Wood, Plastic, Aluminium, Di-Bond, Engraving Board, Fomex.Engineering plastics, marble, acrylic, perspex, PVC, Composite panel, Copper, Alloys, MDF, etc.

PARAMETERS
NO.	Discription	Parameter
1	X-Y-Z Working Area	1200x1200x120mm
2	Table Size	1340X1540mm
3	X-Y-Z Traveling Positioning Accuracy	±0.05/300mm
4	X-Y-Z repositioning Positioning Accuracy	±0.04mm
5	Table Size	T-slot Extrusions
6	Frame	Cast Steel
7	X, Z Structure	Hiwin Ball Screw
8	Y Structure	Ball Screw and Hiwin Rail Shaft Linear Bearings
9	Max. Power Consumption(Without spindle)	1.2KW
10	Max.Rapid Travel Rate	10000mm/min
11	Max.Working Speed	6000mm/min
12	Spindle Power Motor	HSD 1.5Kw air cooling spindle
13	Spindle Speed	0-24000RPM
14	Drive Motors	Stepper Motors
15	Working Voltage	AC220V/50/60Hz (Option: 380V)
16	Command Language	G Code
17	Operating System	DSP System (Mach3 PC Software)
18	Interface	USB
19	Flash Memory	128M (U Disk)
20	Collet	ER16
21	X-Y Resolution	<0.01mm
22	Software Compatability	Ucancam software, Type3 Software, (Option:Artcam Software)
23	Running Environemt	Temperature: 0℃～45℃
		Relative humidity: 30%～75%
24	Packing Size	1850x1850x1450mm
25	Net Weight	380KG
26	Gross Weight	500KG
All parameters above subject to change without prior notice